Inside Mounting

  1. Place the right side wall mount on the inside of your window frame. Ensure that the center of the mounting hole is at least 1.5 inches from the top of the window. This will allow for clearance from the ceiling.
  2. Mark the holes of the mount for drilling, or insert the mounting screws and secure the mount to the wall. 
  3. Repeat these steps for the left-hand wall mount. 
  4. If you run into problems with the right and left-hand mounts being too rigid on the wall, loosen the wall mounting screws slightly so the left and right-hand mounts have a small amount of room to flex. 
  5. Your inside mount brackets are installed and ready to use! Continue with the next step on the getting started page.

Menu