Pull Cord Setup

  1. Before the shade is used, the top and bottom bounds of the shade need to be set. 
  2. Pull and hold the cord once to move the shade down. A red light will show and blink while the shade moves. Pull and hold the cord twice to move the shade up. A blue light will show and blink while the shade moves up. 
  3. Move the shade to the top of the window. When the shade reaches the top, pull the cord three times. A green light will show on the third pull. This sets the top of the shade. 
  4. Move the shade to the bottom of the window. When the shade reaches the bottom, pull the cord three times. A green light will show on the third pull. This sets the bottom of the shade.
  5. The shade is now set up. Pull the cord twice and release quickly for the shade to move to the top of the window. Pull the cord once and release quickly to move the shade to the bottom of the window. You can also set the shade to any height in between by pulling and holding the cord either once or twice. The shade will continue moving until you stop pulling.
  6. If you encounter any problems, or the shade does not respond to the quick pull and release commands, pull the cord three times and hold until the green light stops blinking. This will factory reset the shade for a new setup.
  7. Your shade’s top and bottom are set up! Continue with the next step on the getting started page.
Menu